V 0397
DOUBLE OVERCENTER FLANGED VALVE WITH DOUBLE PRESSURE RELIEF VALVE INTEGRATED
Flanged hydraulic block with double overcenter valve, double pressure relief valve and brake release.
V 1126
3-WAYS COMPENSATED FLOW CONTROL VALVE WITH REVERSE CHECK
This valve enables to keep the flow to constant on port A irrespective of the pressure variations.The excessive flow rate is discharged to port …
V 0359
DOUBLE ACTING PLOUGH OVERTURNING VALVE WITH ALIGNMENT FOR ON LAND PLOUGHS WITH REVERSE
This valve has been designed for use with two cylinders in sequence for reversible plough to obtain the automatic alignment of load and its overturning. Operating instructions: first the alignment cylinder B ….
V 0362
SIMPLE ACTING PLOUGH OVERTURNING VALVE WITH ALIGNMENT FOR IN FARROW PLOUGHS WITH REVERSE
This valve has been designed for use with two cylinders in sequence for reversible plough to obtain the automatic alignment of load and its overturning. The rotation of the frame….
V 0395 FLV
SINGLE OVERCENTRE VALVE WITH G.3/8” SCREW CONNECTION AND G.1/4” PRESSURE GAUGE AND PILOT…
These valves are used to control the actuator movements and block in one direction. In order to have the descent of a load under control and avoid …ock.
V 0405
IN-LINE 3 -WAY SINGLE OVERCENTRE VALVE
These valves are used to control the actuator movements and block in one direction. In order to have the descent of a load under control and avoid the load’s weight being carried away the valve will prevent any cavitation of the actuator.
V 0315 – V0316
DOUBLE OVERCENTRE VALVE PARTIALLY BALANCED
These valves are used to control the actuator movements and block it in both directions. In order to have the descent of a load under control…
V 0317
SINGLE OVERCENTRE VALVE PARTIALLY BALANCED
These valves are used to control the actuator movements and block it in one direction. In order to have the descent of a load under control and avoid…
V 0445
DOUBLE OVERCENTRE VALVE FLANGEABLE ON DANFOSS MOTORS OMT
These valves are used to control the motor rotation and block it in both directions. In order to have the load under control and avoid its inertia …
V 0644
ONE-WAY VALVE MALE FEMALE WITH G.1” CONNECTION
Valve that allows free flow in one direction and blocks it in the opposite direction. Used to keep a hydraulic system under pressure.
V 0118
DOUBLE PILOT OPERATED CHECK VALVE WITH SPECIAL DIMENSIONS
Valve used to lock a cylinder in place in both directions, allowing flow in one direction and preventing it in the opposite direction until pilot pressure is applied.
V 0116
IN-LINE DOUBLE PILOT OPERATED CHECK VALVE WITH 3/4” CONNECTIONS
Pilot check valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.
DFL
2-WAYS STEEL FLOWER DIVIDERS ( CARTRIDGE VERSION )
These valves are used when two equal actuators, that are not mechanically coupled, supplied by the same pump and controlled by a single valve …
V 0689
LIGHT WEIGHT RELIEF VALVE
This light-weight relief valve limits the maximum pressure in a circuit to the valve’s setting. When the circuit pressure reaches the setting …